Version 2016

Top  Previous  Next

In order to use the Daedo 2016 connection, you have to do some setup.

 

 

 

 

In the basic tournament settings, you have to go to the Daedo Truescore tab and check the box Connection with Daedo/EBP Truescore software.

Select the Daedo Truescore 2016 checkbox.

The 'Start the webserver for the daedo 2016 interface' checkbox needs to be checked also.

The webserver is responsible for the communication.

 

If you want to use Daedo, you also have to make clear to TaekoPlan that you will do so.

Open the Court configuration by clicking the Configure courts button and select Daedo 2016 from the pulldown box.

You do not have to enter any port numbers as the communication is based on HTTP protocol.

Depending on what type of Daedo vests you are using (Generation 1 or 2), you need to enter a '1' or a '2' in the DaedoGen column.

This will provide the correct vestsize when required in all TaekoPlan modules.

 

You also have to enter  fight information, like rounds, length, break, injury etc. in the scoreboard configuration.

Please note also that all changes in no. of rounds, round-length or injury/break times will be active from the next match on.

 

If you have opened a tournament which has the Daedo 2016 connection enabled, you will see a Daedo bar on the top of the screen:

 

 

For the Daedo 2016 connection all leds are always green. as we are using the HTTP protocol, there is no continuous connection.

 

You can check logging for the connection. In the folder Logging a file TCPIP.txt is created which shows all communication between the courts and the central computer.

 

 

 

 

 

 

 

 

 

TaekoPlan English Manual - (c) 2017 SenSoft Automation - Alphen aan den Rijn - The Netherlands